FixVault
Home › Chevrolet › 2004 › Astro Van Cargo, RWD › Repair and Diagnosis › Engine Performance › System › Engine Controls - 4.3L - Introduction › Repair Instructions › Accelerator Controls Cable Replacement › Removal Procedure

Removal Procedure

  1. Remove the engine cover. Refer to Engine Cover Replacement in Interior Trim.
  2. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Resonator Replacement .
  3. Remove the accelerator cable from the throttle lever.
    Fig 1: Identifying Accelerator Cable/Throttle Body Lever
    GM325556Courtesy of GENERAL MOTORS CORP.
  4. Remove the accelerator cable from the engine cable bracket.
    Fig 2: Expanded View Of Accelerator Cable From The Engine Cable Bracket
    GM325557Courtesy of GENERAL MOTORS CORP.
  5. Remove the accelerator cable (1) from the accelerator pedal (3).
    Fig 3: Identifying Accelerator Cable Assembly Components
    GM590402Courtesy of GENERAL MOTORS CORP.
  6. Remove the accelerator cable assembly from the bulkhead (1).
    Fig 4: Expanded View Of Accelerator Cable Assembly At The Bulkhead
    GM587901Courtesy of GENERAL MOTORS CORP.
About FixVault