FixVault
Home › Chevrolet › 2004 › Astro Van Passenger, RWD › Repair and Diagnosis › Engine Performance › System › Engine Controls - 4.3L - Introduction › Repair Instructions › Intake Air Temperature (IAT) Sensor Replacement › Installation Procedure

Installation Procedure

  1. Install the IAT sensor in the air cleaner outlet duct.
    Fig 1: Intake Air Temperature (IAT) Sensor
    GM317493Courtesy of GENERAL MOTORS CORP.
  2. Connect the IAT sensor harness connector.
    Fig 2: Locating Intake Air Temperature (IAT) Sensor Harness Connector
    GM423117Courtesy of GENERAL MOTORS CORP.
  3. Connect the negative battery cable.
About FixVault