FixVault
Home › Chevrolet › 2004 › Avalanche 2500 › Repair and Diagnosis › Engine Performance › System › Engine Control System - 8.1L (Introduction) › Repair Instructions › Fuel Tank Pressure Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of Fuel Pressure Sensor
    GM1312086Courtesy of GENERAL MOTORS CORP.
  1. Remove the intermediate fuel/evaporative emission (EVAP) lines. Refer to Fuel Hose/Pipes Assembly Replacement (Front)  or Fuel Hose/Pipes Assembly Replacement (Intermediate) .
  2. Gently pry straight up, in order to remove the fuel pressure sensor (1).
About FixVault