Removal Procedure

Fig 1: Position Assurance (CPA) Retainer

GM858196

Courtesy of GENERAL MOTORS CORP.

Remove the connector position assurance (CPA) retainer (1).
Disconnect the instrument panel (I/P) wiring harness electrical connector (2).

Fig 2: View Of TAC Module Electrical Connector

GM871922

Courtesy of GENERAL MOTORS CORP.

Disconnect the engine wiring harness electrical connector (1).

Fig 3: Throttle Actuator Control (TAC) Module Nuts

GM855736

Courtesy of GENERAL MOTORS CORP.

Remove the throttle actuator control (TAC) module nuts.
Remove the TAC module.