FixVault
Home › Chevrolet › 2004 › Chevy Express G1500, Van Cargo, 4.3 X › Repair and Diagnosis › Engine Performance › System › Engine Control System - 4.3L (Introduction) › Repair Instructions › Ignition Coil(s) Replacement › Removal Procedure

Removal Procedure

  1. Remove the engine cover. Refer to Engine Cover Replacement in Interior Trim.
  2. Disconnect the ignition coil electrical connectors.
  3. Remove the ignition coil wire to the distributor.
    4. Fig 1: View Of Accelerator Cable Bracket
    GM398027Courtesy of GENERAL MOTORS CORP.
  4. Remove the accelerator cable bracket.
    5. Fig 2: View Of Bracket, Studs & Ignition Coil
    GM31466Courtesy of GENERAL MOTORS CORP.
  5. Remove the studs holding the bracket and the ignition coil to the intake manifold.
  6. Remove the bracket and the ignition coil.
  7. Drill and punch out the two rivets holding the ignition coil to the bracket.
  8. Remove the ignition coil from the bracket.
About FixVault