FixVault
Home › Chevrolet › 2004 › Chevy Express G1500, Van Cargo, 4.3 X › Repair and Diagnosis › Engine Performance › System › Engine Control System - 4.3L (Introduction) › Repair Instructions › Throttle Position (TP) Sensor Replacement › Removal Procedure

Removal Procedure

  1. Remove the engine cover. Refer to Engine Cover Replacement in Interior Trim.
    2. Fig 1: View Of TP Sensor Harness Connector
    GM12885Courtesy of GENERAL MOTORS CORP.
  2. Remove the throttle position (TP) sensor harness connector.
    3. Fig 2: View Of TP Sensor Attaching Fasteners
    GM10935Courtesy of GENERAL MOTORS CORP.
  3. Remove the TP sensor attaching fasteners.
    4. NOTE: The TP sensor is an electrical component. Do not soak the TP sensor in any liquid cleaner or solvent as damage may result.
    Fig 3: View Of TP Sensor
    GM10936Courtesy of GENERAL MOTORS CORP.
  4. Remove the TP sensor from the throttle body assembly.
About FixVault