FixVault
Home › Chevrolet › 2004 › Classic › Repair and Diagnosis › Engine Performance › System › Engine Control System (Introduction) - 2.2L (L61) › Repair Instructions › Fuel Hose/Pipes Replacement - Engine Compartment (Fuel Pipes) › Removal Procedure

Removal Procedure

  1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure .
  2. Disconnect the engine fuel pipes from the engine fuel flex hoses. Refer to Quick Connect Fitting(s) Service (Metal Collar) .
  3. Remove the engine fuel pipes fasteners located on the engine.
  4. Use a backup wrench and disconnect the engine fuel pipes from the fuel rail.
  5. Remove the engine fuel pipes.
    6. Fig 1: View Of Fuel Rail
    GM783968Courtesy of GENERAL MOTORS CORP.
  6. Remove the O-rings (2) from the fuel rail and pipes connections.
  7. Separate the bundle if replacing a single pipe.
About FixVault