FixVault
Home › Chevrolet › 2004 › Classic › Repair and Diagnosis › External Pages › Different car › Section 30 (Wiper System And Washer System) › Repair Instructions › Washer Solvent Container Level Sensor Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Am and 2004 Oldsmobile Alero. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Washer Solvent Container Level Sensor & Container
    GM793942Courtesy of GENERAL MOTORS CORP.
  1. Position the seal to the washer solvent container pressing in until fully seated.
  2. Position the washer solvent container level sensor to the washer solvent container pressing in until fully seated.
    3. Fig 2: View Of Washer Solvent Container & Electrical Connector
    GM793941Courtesy of GENERAL MOTORS CORP.
  3. Connect the washer solvent container level sensor electrical connector.
  4. Install the left front fender liner. Refer to Front Fender Liner Replacement in Body Front End.
  5. Fill the washer solvent container with washer solvent.
About FixVault