FixVault
Home › Chevrolet › 2004 › Classic › Repair and Diagnosis › Steering › Steering Wheel & Steering Column › Repair Instructions › Steering Wheel Control Switch Assembly Replacement › Installation Procedure

Installation Procedure

  1. Connect the wiring harnesses to the switches.
    2. Fig 1: Identifying Steering Wheel Control Switches
    GM323518Courtesy of GENERAL MOTORS CORP.
  2. Press the control switches (1), into the steering wheel.
  3. Install the rear trim cover to the steering wheel.
  4. Install the steering wheel to the steering column. Refer to Steering Wheel Replacement .
About FixVault