Installation Procedure
Courtesy of GENERAL MOTORS CORP.
- Install a replacement stud in the wheel hub.
- Add enough washers (3) in order to draw the stud into the hub (2).
- Install the wheel nut (1) with the flat side against the washers (3).
- Tighten the wheel nut (1) until the wheel stud is fully seated against the hub flange.
- Back off the wheel nut (1) and remove the washers (3).
- Install the brake rotor. Refer to Brake Rotor Replacement
in Disc Brakes.
- Install the brake caliper and bracket. Refer to Brake Caliper Replacement
in Disc Brakes.
- Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation
in Tires and Wheels.
- Lower the vehicle.