FixVault
Home › Chevrolet › 2004 › Corvette Base, 2D Convertible, Automatic › Repair and Diagnosis › Accessories & Equipment › Entertainment Systems › Repair Instructions › Antenna Module Replacement › Removal Procedure

Removal Procedure

  1. Remove the door sill plate. Refer to Door Sill Plate Replacement in Interior Trim.
  2. Remove the lock pillar trim panel. Refer to Trim Replacement - Lock Pillar (Upper Convertible) or Trim Replacement - Lock Pillar (Coupe) or Trim Replacement - Lock Pillar (Lower Convertible and Hard Top) in Interior Trim.
  3. Disconnect the electrical/audio connector (3) from the antenna module (6).
    Fig 1: Antenna Module Components
    GM65104Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the following three coaxial cables from the antenna module (6).
    • Rear lift window antenna extension (1)
    • Radio control (4)
    • Front windshield antenna (5)
  5. Remove the screws retaining the antenna module (6) to the lock pillar.
  6. Remove the antenna module (6).
About FixVault