FixVault
Home › Chevrolet › 2004 › Cutaway 4.8 V › Repair and Diagnosis › Brakes › Antilock Brake System, Traction Control System & Stability Control System › Repair Instructions › Traction Control Switch Replacement › Installation Procedure

Installation Procedure

  1. Connect the harness connector to the switch.
    2. Fig 1: Traction Control Switch Harness Connector
    GM788223Courtesy of GENERAL MOTORS CORP.
  2. Install the switch into the switch plate.
    3. Fig 2: Traction Control Switch
    GM1384312Courtesy of GENERAL MOTORS CORP.
  3. Ensure that the switch is secure into both retaining tabs.
  4. Install the switch plate to the I/P.
About FixVault