FixVault
Home › Chevrolet › 2004 › Cutaway 4.8 V › Repair and Diagnosis › External Pages › Different car › Section 3 (Engine Control System - 4.3L (Introduction)) › Repair Instructions › Accelerator Controls Pedal Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Savana and 2004 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Accelerator Pedal Components
    GM17457Courtesy of GENERAL MOTORS CORP.
  1. Lift upward on the accelerator pedal (3) to relieve the tension on the cable (2).
  2. Remove the retainer (1) from the pedal lever (4) hole.
  3. Remove the cable from the slot in the pedal lever.
  4. Remove the accelerator pedal mounting fasteners.
  5. Remove the accelerator pedal assembly.
About FixVault