FixVault
Home › Chevrolet › 2004 › Cutaway 6.0 U › Repair and Diagnosis › Brakes › Antilock Brake System, Traction Control System & Stability Control System › Repair Instructions › Traction Control Switch Replacement › Removal Procedure

Removal Procedure

  1. Use a flat-bladed tool to remove the switch plate from the instrument panel (I/P).
    2. Fig 1: Traction Control Switch
    GM1384312Courtesy of GENERAL MOTORS CORP.
  2. Gently lift the retaining tabs and remove the switch from the switch plate.
  3. Disconnect the harness connector from the switch.
    4. Fig 2: Traction Control Switch Harness Connector
    GM788223Courtesy of GENERAL MOTORS CORP.
About FixVault