FixVault
Home › Chevrolet › 2004 › Cutaway 6.0 U › Repair and Diagnosis › Engine Performance › System › Engine Control System - 4.8L, 5.3L & 6.0L (Introduction) › Repair Instructions › Fuel Level Sensor Replacement › Installation Procedure

Installation Procedure

    Fig 1: Fuel Level Sensor
    GM1306358Courtesy of GENERAL MOTORS CORP.
  1. Install the fuel level sensor (1).
  2. Connect the electrical connector to the fuel tank sender.
  3. Install the fuel sender assembly. Refer to Fuel Sender Assembly Replacement .
About FixVault