FixVault
Home › Chevrolet › 2004 › Epica LS › Repair and Diagnosis › Engine Performance › System › Engine Control System - 2.5L (LBK) - Repair Instructions › Repair Instructions › Camshaft Position (CMP) Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of CMP Sensor Connector
    GM1375178Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
  1. Disconnect the negative battery cable.
  2. Disconnect the camshaft position (CMP) sensor connector.
  3. Remove the CMP sensor.
About FixVault