FixVault
Home › Chevrolet › 2004 › Epica LS › Repair and Diagnosis › Engine Performance › System › Engine Control System - 2.5L (LBK) - Repair Instructions › Repair Instructions › Intake Air Temperature (IAT) Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Identifying IAT Sensor And Connector
    GM1375192Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
  1. Disconnect the negative battery cable.
  2. Disconnect the intake air temperature (IAT) sensor connector.
  3. Remove the IAT sensor.
About FixVault