Installation Procedure

Fig 1: Identifying Floor Seat Belt Anchor Bolts

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the floor seat belt anchor bolts.
Tighten: Tighten the floor seat belt anchor bolt to 38 N.m (28 lb ft) .

Fig 2: View Of Rear Seat Belt Retractors And Securing Bolts

Courtesy of GENERAL MOTORS CORP.

Install the rear seat belt retractor bolts (LH, CENTER, RH) on the back panel.
Tighten: Tighten the rear seat belt retractor bolts to 38 N.m (28 lb ft) .

Fig 3: View Of Rear Seat Cushion

Courtesy of GENERAL MOTORS CORP.

Install the rear seat cushion. Refer to Seat Cushion Replacement - Rear in Seats.
Install the rear window shelf panel. Refer to Trim Panel Replacement - Rear Window Shelf in Interior Trim.