FixVault
Home › Chevrolet › 2004 › Epica LS › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Rack and Pinion Boot Replacement › Removal Procedure

Removal Procedure

    Fig 1: Identifying Outer Tie Rod And Dust Boot
    GM1256248Courtesy of GENERAL MOTORS CORP.
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the wheel. Refer to Tire and Wheel Removal and Installation .
  3. Remove the outer tie rod. Refer to Rack and Pinion Outer Tie Rod End Replacement .
  4. Remove the dust boot retaining clamps.
  5. Remove the dust boot.
About FixVault