Rear Toe Adjustment

Fig 1: View Of Front Parallel Link Cam Bolt

Courtesy of GENERAL MOTORS CORP.

Perform a preliminary inspection before any attempt is made to change or correct the wheel alignment factors. Refer to Preliminary Alignment Inspection .
Loosen the front parallel link cam bolt to crossmember.

Fig 2: Identifying Front Parallel Link Cam Bolt

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the front parallel link cam bolt.
Tighten: Tighten the bolt to 40 N.m (30 lb ft) .
Adjust the rear toe specification. Refer to Wheel Alignment Specifications for preferred specifications.
Tighten the front parallel link cam bolt.
Tighten: Tighten the bolt to 80 N.m (59 lb ft) .