FixVault
Home › Chevrolet › 2004 › Impala LS › Repair and Diagnosis › Electrical › Instrument Panel System Displays, Gauges And Console › Repair Instructions › Steering Column Filler Replacement › Installation Procedure

Installation Procedure

  1. Install the rear compartment release switch.
  2. Connect the electrical connector to the rear compartment release switch.
  3. Align the steering column filler panel to the I/P lower trim panel. Press the filler panel retainers into the I/P lower trim panel openings.
    4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the steering column filler panel bolts.

    Tighten:  Tighten the bolts to 2 N.m (18 lb in).

    5. Fig 1: Installing Steering Column Filler Panel
    GM519517Courtesy of GENERAL MOTORS CORP.
  5. Install the left I/P insulator retainers to the lower I/P trim pad.
  6. Install the I/P fuse block access hole cover.
About FixVault