FixVault
Home › Chevrolet › 2004 › Impala LS › Repair and Diagnosis › Engine Performance › System › Engine Control System 3.8L (Introduction) › Repair Instructions › Boost Control Solenoid Replacement › Removal Procedure

Removal Procedure

  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement in Engine Mechanical - 3.8L.
  2. Disconnect the boost source and signal hoses from the boost control solenoid (2).
  3. Disconnect the boost control solenoid electrical connector.
  4. Remove the boost control solenoid nut.
  5. Remove the boost control solenoid (2).
    6. Fig 1: Removing Boost Control Solenoid
    GM66407Courtesy of GENERAL MOTORS CORP.
About FixVault