Installation Procedure

NOTE:

Do not attempt to straighten kinked nylon pipes. Replace any kinked nylon pipes in order to prevent damage to the vehicle.
Do not attempt to repair sections of nylon pipes. Replace damaged nylon pipes.
Replace the vapor pipes with original equipment or parts that meet GM specifications.
Replace the vapor hoses with original equipment or parts meeting GM specifications. Use only reinforced fuel-resistant hose identified with the word Fluoroelastomer or GM 6163M on the hose.

Connect the EVAP vent hose (6), the EVAP purge pipe (8), and the EVAP vapor pipe (7) to the EVAP canister (1). Refer to Quick Connect Fitting(s) Service (Plastic Collar) .
Install the fuel tank. Refer to Fuel Tank Replacement .

Fig 1: Locating EVAP And Fuel Tank Components

Courtesy of GENERAL MOTORS CORP.