FixVault
Home › Chevrolet › 2004 › Impala LS › Repair and Diagnosis › External Pages › Different car › Section 109 (Automatic Transaxle - Introduction & Repair Instructions) › Repair Instructions › Fluid Temperature Sensor Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the case side cover. Refer to Case Side Cover Replacement .
    2. Fig 1: Locating Wiring Harness & Electrical Connectors
    GM48209Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the wiring harness assembly from the fluid temperature sensor (391).
  3. Remove the fluid temperature sensor (391).
About FixVault