FixVault
Home › Chevrolet › 2004 › Impala LS › Repair and Diagnosis › External Pages › Different car › Section 109 (Automatic Transaxle - Introduction & Repair Instructions) › Repair Instructions › Input Speed Sensor Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Input Speed Sensor
    GM48196Courtesy of GENERAL MOTORS CORP.
  1. Install the input speed sensor (440).
  2. Install the input speed sensor retaining clip (441).
  3. Connect the input speed sensor electrical connector.
  4. Install the case side cover. Refer to Case Side Cover Replacement .
About FixVault