Removal Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.

Remove the inflator fill valve access cover.
Remove the lower rear quarter trim panel. Refer to Trim Panel Replacement - Rear Quarter - Right in Interior Trim.
Remove the switch from the accessory inflator control panel.

Fig 1: Accessory Inflator Switch Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Disconnect the electrical connector (1) from the inflator switch (2).