FixVault

Removal Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the module in the full open position.
  2. Remove the headliner. Refer to Headlining Trim Panel Replacement (Extended Sedan) or Headlining Trim Panel Replacement (Sedan) .
  3. Disconnect the electrical connector from the motor/actuator.
  4. Remove the motor. Refer to Sunroof Motor/Actuator Replacement .
  5. Push the window guides rearward on the track until the guides are positioned against the rear hard stop.