FixVault
Home › Chevrolet › 2004 › Impala LS › Repair and Diagnosis › External Pages › Different car › Section 824 (Sunroof System) › Repair Instructions › Sunroof Window Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Sunroof Window
    GM791501Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Ensure that the window trade mark is at the rear of the opening.
  1. Position the sunroof window into the opening.
    2. Fig 2: Identifying Sunroof Window Screws
    GM1222466Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  2. Install the sunroof window screws. Do not tighten the screws.

    Tighten:  Tighten the bolts to 4 N.m (35 lb in).

  3. Carefully close the sunroof window from the vent position to the full closed position.
  4. Adjust the sunroof window. Refer to Sunroof Window Height and Opening Fit Adjustment .
  5. Close the sunshade.
  6. Cycle the sunroof window to ensure proper operation and fit.
About FixVault