FixVault
Home › Chevrolet › 2004 › Impala LS › Repair and Diagnosis › Transmission › Automatic Trans › Shift Interlock System › Repair Instructions › Automatic Transmission Shift Lock Actuator Replacement (Floor Shift) › Installation Procedure

Installation Procedure

  1. Install the automatic shift lock actuator to the base of the shift lock control and the pivot point (1).
    2. Fig 1: Installing Automatic Shift Lock Actuator - Floor Shift
    GM442716Courtesy of GENERAL MOTORS CORP.
  2. Connect the automatic shift lock actuator electrical connector.
    3. Fig 2: Connecting Automatic Shift Lock Actuator Electrical Connector - Floor Shift
    GM190956Courtesy of GENERAL MOTORS CORP.
  3. Install the center console. Refer to Console Replacement - Front Floor (Impala) or Console Replacement - Front Floor (Monte Carlo) in Instrument Panel, Gages and Console.
  4. Connect the negative battery cable. Refer toBattery Negative Cable Disconnect/Connect Procedure in Engine Electrical.
About FixVault