FixVault
Home › Chevrolet › 2004 › Impala SS › Repair and Diagnosis › Accessories & Equipment › Cruise Control Systems › Repair Instructions › Cruise Control Cable Replacement (3.4L) › Installation Procedure

Installation Procedure

  1. Position the cruise control cable to the engine.
    Fig 1: Cruise Control Cable Routing
    GM301679Courtesy of GENERAL MOTORS CORP.
  2. Install the cruise control cable to the cruise control module by rotating the cruise control cable clockwise.
    3. Fig 2: Cruise Control Module & Cable
    GM301671Courtesy of GENERAL MOTORS CORP.
  3. Install the cruise control cable to the cruise control cable retainers.
    4. Fig 3: Cruise Control Cable & Module Strap
    GM301717Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Ensure the module strap is not twisted during installation of the cable.
    IMPORTANT: The cruise control cable does not require mechanical adjusting after the replacement. The cruise control module internally adjusts the cable.
  4. Install the cruise control cable to the cruise control module cable strap.
    5. Fig 4: Cruise Control & Accelerator Control Cable Bracket
    GM329490Courtesy of GENERAL MOTORS CORP.
  5. Install the cruise control cable to the throttle body lever and the accelerator control cable bracket.
About FixVault