FixVault
Home › Chevrolet › 2004 › Impala SS › Repair and Diagnosis › External Pages › Different car › Section 108 (Front Suspension System) › Repair Instructions › Lower Control Arm Bushings Replacement (Horizontal) › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the lower control arm. Refer to Lower Control Arm Replacement .
  2. Secure the lower control arm in a vise.
    3. Fig 1: Assembling Bushing Removal Tools
    GM1171032Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Use a 1/2 x 20 in standard thread nut with the puller bolt.
  3. Assemble the bushing removal tools as indicated:
    1. The nut (1)
    2. The J 21474-01  washer (2).
    3. The J 21474-01  bearing (3).
    4. The J 21474-5  (4).
    5. The J 21474-01  puller bolt (5).
  4. Tighten the puller bolt (5) until the bushing is removed.
  5. Disassemble the J 21474-01  and J 21474-5  .
About FixVault