FixVault
Home › Chevrolet › 2004 › Impala SS › Repair and Diagnosis › Restraints › Restraints Control Systems › Seat Belt System › Repair Instructions › Seat Belt Buckle Replacement - Left Front › Installation Procedure

Installation Procedure

  1. Install the seat belt buckle to the left front seat.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the nut to the seat belt anchor stud.

    Tighten:  Tighten the seat belt buckle anchor nut to 42 N.m (31 lb ft).

    3. Fig 1: Installing Seat Belt Buckle Anchor Stud Nut
    GM471317Courtesy of GENERAL MOTORS CORP.
  3. Connect the electrical connector to the seat belt buckle.
    4. Fig 2: Connecting Seat Belt Buckle Electrical Connector
    GM519326Courtesy of GENERAL MOTORS CORP.
  4. Position the left front seat to the original position.
About FixVault