FixVault
Home › Chevrolet › 2004 › Malibu Base › Repair and Diagnosis › Electrical › Instrument Panel System Displays, Gauges And Console › Repair Instructions › Console Replacement › Installation Procedure

Installation Procedure

    IMPORTANT: Do not let the console contact the shifter handle or bezel.
    Fig 1: View Of Electrical Connectors And Console
    GM1207909Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connectors and install the console.
    2. Fig 2: View Of Pen Tray
    GM1207906Courtesy of GENERAL MOTORS CORP.
  2. Install the pen tray.
    3. Fig 3: View Of Rear Console Bolts
    GM1207907Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the rear console bolts.

    Tighten:  Tighten the bolts to 1 N.m (10 lb in).

  4. Install the front console screws.

    Tighten:  Tighten the bolts to 1 N.m (10 lb in).

    5. Fig 4: View Of Front Console Screw Cover
    GM1207902Courtesy of GENERAL MOTORS CORP.
  5. Install the front console screw cover.
  6. Install the left console trim panel. Refer to Console Trim Panel Replacement - Left .
  7. Install the right console trim panel. Refer to Console Trim Panel Replacement - Right .
About FixVault