FixVault
Home › Chevrolet › 2004 › Malibu Base › Repair and Diagnosis › Engine Performance › System › Engine Control System (Introduction) - 2.2L (L61) › Repair Instructions › Engine Coolant Temperature (ECT) Sensor Replacement › Removal Procedure

Removal Procedure

  1. Turn the ignition OFF.
    2. IMPORTANT: Engine coolant must be drained below the level of the engine coolant temperature (ECT) sensor.
  2. Disconnect the ECT sensor harness connector.
    3. Fig 1: Removing ECT
    GM895897Courtesy of GENERAL MOTORS CORP.
  3. Remove the ECT (1).
About FixVault