FixVault
Home › Chevrolet › 2004 › Malibu Base › Repair and Diagnosis › Engine Performance › System › Engine Control System (Introduction) - 2.2L (L61) › Repair Instructions › Ignition Control Module Replacement › Removal Procedure

Removal Procedure

  1. Turn the ignition OFF.
  2. Disconnect the electronic ignition (EI) module harness connector.
    3. Fig 1: Removing EI Module Attachment Screws And EI Module
    GM896789Courtesy of GENERAL MOTORS CORP.
  3. Remove the EI module attachment screws and the EI module.
About FixVault