FixVault
Home › Chevrolet › 2004 › Malibu Base › Repair and Diagnosis › Engine Performance › System › Engine Control System (Introduction) - 2.2L (L61) › Repair Instructions › Mass Air Flow (MAF) Sensor Replacement › Removal Procedure

Removal Procedure

  1. Disconnect the mass air flow (MAF) sensor electrical connector.
  2. Remove the MAF sensor screws.
    3. Fig 1: Removing MAF Sensor From Air Cleaner Cover
    GM1236094Courtesy of GENERAL MOTORS CORP.
  3. Remove the MAF sensor from the air cleaner cover.
About FixVault