Installation Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Overhead Console Mounting

Courtesy of GENERAL MOTORS CORP.

Position the overhead console in the vehicle.
Connect the electrical connectors.
Align the retainers to the openings in the vehicle.
Push the overhead console upward until the retainers engage securing the overhead console to the vehicle.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the overhead console screw.
Tighten: Tighten the screw to 2 N.m (18 lb in).
Install the courtesy lamp lens.