FixVault
Home › Chevrolet › 2004 › Malibu Base › Repair and Diagnosis › Steering › Steering Wheel & Steering Column › Repair Instructions › Multifunction, Turn Signal Switch Replacement › Installation Procedure

Installation Procedure

    Fig 1: Installing Multifunction Switch To Stalk Switch Mount
    GM1230522Courtesy of GENERAL MOTORS CORP.
  1. Install the multifunction switch to the stalk switch mount.
  2. Connect the electrical connectors.
  3. Install the upper and lower trim covers. Refer to Steering Column Trim Covers Replacement .
  4. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 3 in SIR.
About FixVault