FixVault
Home › Chevrolet › 2004 › Malibu Maxx LS › Repair and Diagnosis › Engine Performance › System › Engine Control System (Introduction) - 3.5L (Lx9) › Repair Instructions › Accelerator Controls Pedal Replacement › Removal Procedure

Removal Procedure

  1. Disconnect the accelerator pedal position sensor electrical connector.
    2. Fig 1: Removing Accelerator Mounting Bolts (1) From Accelerator Bracket
    GM1544734Courtesy of GENERAL MOTORS CORP.
  2. Remove the accelerator mounting bolts (1) from the accelerator bracket.
  3. Remove the accelerator assembly (2) from the vehicle.
About FixVault