FixVault
Home › Chevrolet › 2004 › Malibu Maxx › Repair and Diagnosis › Accessories & Equipment › Entertainment Systems › Entertainment System › Repair Instructions › Video Display Replacement › Installation Procedure

Installation Procedure

    Fig 1: Installing Video Display
    GM1208016Courtesy of GENERAL MOTORS CORP.
  1. Install the video display.
  2. Install the video display wire harness connector.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the video display hinge screws.

    Tighten:  Tighten the screws to 1 N.m (10 lb in).

  4. Install the hinge cover. Refer to Trim Plate Replacement - Console Rear (UK6) and Trim Plate Replacement - Console Rear (U32) in Instrument Panel, Gages and Console.
About FixVault