FixVault
Home › Chevrolet › 2004 › Malibu Maxx › Repair and Diagnosis › Body & Frame › Windows › Stationary Window System › Repair Instructions › Window Replacement - Liftgate › Installation Procedure

Installation Procedure

  1. Install the liftgate window into the opening. Refer to Urethane Adhesive Installation of Stationary Windows (Windshield) , Urethane Adhesive Installation of Stationary Windows (Rear Window)  and Urethane Adhesive Installation of Stationary Windows (Liftgate) .
  2. Connect the liftgate window defogger electrical connectors to the bus bar.
  3. Install the high-mounted stop lamp. Refer to High Mounted Stop Lamp Replacement (Sedan) and High Mounted Stop Lamp Replacement (Extended Sedan) .
  4. Install the liftgate trim. Refer to Trim Panel Replacement - Liftgate (Lower) , Trim Panel Replacement - Liftgate (Upper) and Trim Panel Replacement - Liftgate (Right or Left) in Body Rear End.
  5. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
  6. Close the liftgate.
About FixVault