FixVault
Home › Chevrolet › 2004 › Malibu Maxx › Repair and Diagnosis › Engine Performance › System › Engine Control System (Introduction) - 3.5L (Lx9) › Repair Instructions › Exhaust Gas Recirculation (EGR) Pipe Replacement › Installation Procedure

Installation Procedure

    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the EGR pipe to the exhaust manifold.

    Tighten:  Tighten the EGR pipe bolts to 25 N.m (18 lb ft).

    2. Fig 1: Installing EGR Pipe To EGR Valve
    GM1239050Courtesy of GENERAL MOTORS CORP.
  2. Install the EGR pipe to the EGR valve.
  3. Install the EGR pipe bolt.

    Tighten:  Tighten the bolt to 30 N.m (22 lb ft).

About FixVault