FixVault
Home › Chevrolet › 2004 › Malibu Maxx › Repair and Diagnosis › Engine Performance › System › Engine Control System (Introduction) - 3.5L (Lx9) › Repair Instructions › Ignition Control Module Replacement › Removal Procedure

Removal Procedure

  1. Note the position of the spark plug wires for the installation and disconnect the spark plug wires from the ignition coil and module assembly.
    2. Fig 1: Removing/Installing 4 Screws Securing Ignition Coil And Module Assembly To Bracket
    GM1238999Courtesy of GENERAL MOTORS CORP.
  2. Remove the 4 screws securing the ignition coil and module assembly to the bracket.
  3. Remove the ignition coil and module assembly.
About FixVault