FixVault
Home › Chevrolet › 2004 › Optra Base, Automatic › Repair and Diagnosis › Body & Frame › Door Locks › Keyless Entry System › Repair Instructions › Remote Control Door Lock Receiver Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of The Control Module/Receiver
    GM1309313Courtesy of GENERAL MOTORS CORP.
  1. Install the control module/receiver on its mounting bracket.
  2. Connect the control module/receiver electrical connector.
  3. Install the floor console. Refer to Front Floor Console Replacement in Instrument Panel, Gauges and Console.
  4. Connect the negative battery cable.
About FixVault