FixVault
Home › Chevrolet › 2004 › Optra Base, Automatic › Repair and Diagnosis › Electrical › Gauges › Instrument Panel, Gages, And Console › Repair Instructions › Audio Alarm Module Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of Audio Alarm Module Electrical Connector
    GM1308586Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution .
  1. Disconnect the negative battery cable.
  2. Remove the knee bolster trim panel beneath the steering column.
  3. Disconnect the electrical connector.
  4. Remove the screws and the chime module.
About FixVault