FixVault
Home › Chevrolet › 2004 › Optra Base, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls - 2.0L (L34 GMDAT) - Repair Instructions › Repair Instructions › Fuel Pump Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Fuel Pump Assembly And Clip
    GM1376129Courtesy of GENERAL MOTORS CORP.
  1. Clean the gasket mating surface on the fuel tank.
  2. Position the new gasket in place.
  3. Install the fuel pump into the fuel tank in the same location as removed for ease of line and connector installation.
    4. Fig 2: View Of Fuel Pump Assembly And Electrical Connector
    GM1376120Courtesy of GENERAL MOTORS CORP.
  4. Install the fuel pump assembly clip.
  5. Connect the fuel pump assembly connector.
  6. Install the fuel pump line.
    7. Fig 3: View Of Fuel Pump Access Cover
    GM1376119Courtesy of GENERAL MOTORS CORP.
  7. Install the fuel pump access cover.
  8. Connect the negative battery cable.
  9. Perform an operational check of the fuel pump.
  10. Install the rear seat. Refer to Rear Seat Cushion Replacement .
About FixVault