FixVault
Home › Chevrolet › 2004 › Optra Base, Automatic › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Rack and Pinion Boot Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of Outer Tie Rod And Dust Boot
    GM1290116Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Vehicle Lifting Caution .
  1. Raise and suitably support the vehicle.
  2. Remove the wheels. Refer to Tire and Wheel Removal and Installation .
  3. Remove the outer tie rod. Refer to Steering Linkage Outer Tie Rod Replacement .
  4. Remove the dust boot retaining clamps.
  5. Remove the dust boot.
About FixVault