FixVault
Home › Chevrolet › 2004 › Optra Base, Standard › Repair and Diagnosis › Transmission › Manual Trans › Manual Transmission - D20 › Repair Instructions › Gearshift Control Lever Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Gearshift Lever Stop Clamp
    GM1255748Courtesy of GENERAL MOTORS CORP.
  1. Install the gearshift lever into the gearshift lever shaft.
  2. Install the gearshift lever stop clamp.
  3. Rotate the gearshift lever stop clamp to secure it.
    4. Fig 2: View Of Gearshift With Boot
    GM1255746Courtesy of GENERAL MOTORS CORP.
  4. Lower the boot and connect it to the console cover.
  5. Connect the negative battery cable.
About FixVault