FixVault
Home › Chevrolet › 2004 › Optra5 Base, Automatic › Repair and Diagnosis (Single Page) › Transmission › Automatic Trans › Automatic Transmission - ZF 4HP 16 - Repair Instructions › Repair Instructions › Transmission Control Module Replacement › Installation Procedure

Installation Procedure

    IMPORTANT: After replacing the TCM, refer to Service Programming System (SPS) to ensure the module has the latest calibrations.
    Fig 1: Identifying TCM Wiring Connectors
    GM1290879Courtesy of GENERAL MOTORS CORP.
  1. Install the TCM to the bracket.
  2. Connect the wiring connectors.
  3. Connect the negative battery cable.
About FixVault