FixVault
Home › Chevrolet › 2004 › Optra5 Base, Standard › Repair and Diagnosis › Body & Frame › Seats › Seat System › Repair Instructions › Front Seat Replacement - Bucket › Installation Procedure

Installation Procedure

    Fig 1: View Of Plastic Bolt Caps
    GM1308589Courtesy of GENERAL MOTORS CORP.
  1. Install the seat.
  2. Connect the electrical connectors.
    3. NOTE: Refer to Fastener Notice .
  3. Install the bolts into the front portion of the front seat.

    Tighten:  Tighten the front seat-to-floor bolts to 25 N.m (18 lb ft)  .

  4. Install the plastic caps.
    5. Fig 2: View Of Front Seat Floor Bolts
    GM1256631Courtesy of GENERAL MOTORS CORP.
  5. Install the bolts into the rear portion of the front seat.

    Tighten:  Tighten the front seat-to-floor bolts to 25 N.m (18 lb ft)  .

  6. Install the plastic caps.
  7. Connect the negative battery cable.
About FixVault